Your molded pulp food container needs to ship to both the US and EU. Two markets, two regulatory frameworks, zero room for error.
Here's the side-by-side compliance map—and why "food-grade" without a specific standard is meaningless.
| Aspect | US (FDA) | EU |
|---|---|---|
| Key Regulation | FDA 21 CFR 176.260 | EU Regulation (EC) No 1935/2004 + (EU) 2022/1616 |
| Core Requirement | No migration of harmful substances into food | Same, plus specific migration limits (SML) for listed substances |
| Pulp Source Rule | Reclaimed fiber allowed if no "poisonous or deleterious" substances | Virgin fiber preferred; recycled must demonstrate no contamination risk |
| Testing Standard | No mandatory third-party testing (manufacturer self-declaration) | Mandatory third-party migration testing per EU 10/2011 |
| PFAS Stance | 12 states banned PFAS in food packaging as of 2025 | EU-wide PFAS restriction proposal under REACH; effective ban in practice |
This regulation covers "Pulp from Reclaimed Fiber" used in food-contact articles. The key requirements:
1. Fiber source: Must be from paper or paperboard previously used for food packaging—not industrial waste, not medical waste, not mixed municipal waste without sorting
2. No "poisonous or deleterious substances": The manufacturer must ensure no substances migrate to food that could cause harm
3. GMP compliance: Good Manufacturing Practices per 21 CFR 174.5—clean facilities, controlled processes, documented procedures
The gap: FDA doesn't require pre-market approval or third-party testing for food-contact molded pulp. The manufacturer self-declares compliance. This puts the burden on the buyer to verify.The EU framework is fundamentally different:
1. Overall Migration Limit (OML): ≤10 mg of total substances per dm² of food contact surface
2. Specific Migration Limits (SML): Individual limits for listed substances (e.g., formaldehyde SML = 15 mg/kg)
3. Declaration of Compliance (DoC): Mandatory written statement from the manufacturer listing applicable regulations, migration test results, and usage conditions
4. Third-party testing: Expected (not explicitly mandated but practically required by most EU buyers)
The EU's approach is precautionary: If a substance hasn't been explicitly evaluated and listed as safe, it's not allowed—regardless of whether it's been proven harmful.Both the US and EU are converging on PFAS-free food packaging. Key dates:
| Jurisdiction | Effective Date | Scope |
|---|---|---|
| California (AB 1200) | January 2023 | Plant fiber-based food packaging with intentionally added PFAS |
| New York, Washington, 10 other states | 2024-2025 | Similar to CA |
| EU REACH PFAS restriction | Proposal under review | Would cover all PFAS in food-contact materials |
| Denmark | July 2020 | National ban on PFAS in food-contact paper/board |
| Question | Why It Matters | Red Flag Response |
|---|---|---|
| "Can you provide a Declaration of Compliance for EU 1935/2004?" | Required for EU import | "We are food-grade" without a DoC document |
| "What's your overall migration test result per EU 10/2011?" | Proves product meets the 10 mg/dm² limit | "We haven't tested but our material is safe" |
| "Do your coatings contain PFAS?" | Critical for market access | "We don't know" or "Trace amounts" without a test report |
| "What's the source of your recycled fiber?" | FDA 176.260 requires traceable fiber origin | "Mixed waste paper" without sorting verification |
A: Yes, if it meets the stricter EU requirements (migration testing + DoC + PFAS-free). EU-compliant products generally satisfy FDA requirements.
Q: How much does migration testing cost?A: €1,500-3,500 per material type. BioPackBox and YisenPulp provide migration test reports as part of the qualification package for food-contact orders.